Desk Edge Module_Base Pack

Desk Edge Module - Core Experience

Welcome to the Desk Edge Module system! This is the free Core Experience version. It includes the essential Main Clamp, Screw Set, and three versatile modules: the Headphone Stand and Hook 1. It's the perfect way to experience the convenience and stability of the system firsthand.

Want to Unlock the Full Ecosystem?

Our Cults3D store offers the 【Desk Edge Module - Complete Ecosystem】, the ultimate version for power users and supporters. It includes：

• ✅ All Current & Future Modules: Get the Headphone Stand, 3x Hooks, Cup Holder, Pen Pot, Cable Organizer, and more. All future additions will be available to you for FREE after a single purchase.

If you enjoy this design and want to support me in developing more projects, please consider checking out the full version. Your support makes this work possible!

M01 Complete Ecosystem

If you only need specific functions, grab them here:

Expansion Pack 1 - Hook Set

Expansion Pack 2 - Cup & Pen Holder

Expansion Pack 3 - Cable Management

Expansion Pack 4 - Extension Cord Holder

Expansion Pack 5 - Hook Plus Set

M01 Clamp 2.0

M01 PLUS Clamp

Print Settings Recommendations

• Layer Height: 0.16mm - 0.2mm
• Wall Loops: 3 walls recommended. For the Screw part, use 4 walls for extra strength.
• Infill Density: 20 - 30% is sufficient for most uses.
• Supports: Recommended for the overhangs on the Main Clamp and Hooks. (Organic or Tree supports work best for easy removal and material saving).
• Bed Adhesion: A brim is recommended for all parts to ensure stability.
• Material: PLA / PETG

Assembly Instructions

1. Assemble the Clamp: Insert the Screw through the hole in the Main Clamp and thread on the Nut.
2. Mount to Desk: Attach the clamp to your desk's edge and tighten the screw until secure. Note: Do not over-tighten, as this may cause the part to break.
3. Attach Your Module: Slide your chosen module (e.g., Headphone Stand, Hook) down into the slot on the clamp until it clicks into place.