ToolBox
Print Profile(2)
Description
A toolbox, one 200 x 80 mm and one for the mini 160 x 64 mm
Plate 1: The main box
Plate 2: The other boxes, print 4 of this (and observe the rounded corners!!)
Plate 3: The tilts (Note that Plate 8 is an alternative, slightly larger hole)
Plate 4: Plugs for the tilts
Plate 5: Pluts for the tilts with the handles (1 mm longer than Plate 4)
Plate 6: Lid, print two of this
Plate 7: Handle, print two of this
Plate 8: An alternative to plate 3, larger hole 4.2 mm instead of 4.0 mm
Look at the pictures to see how the toolbox should be assembled.
Plate 2: Mind the rounded corners (easy to get it wrong!). Should be on the outside!
It's not that difficult, but it can be very challenging. Be patient!
If the holes on plate 3 are too small, then you should use the ones on plate 8 instead!
Use some sort of tool, e.g. a plier etc…
Boost Me (for free)
Thanks!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)