Hueforge Deadpool

Project: Deadpool.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141x250.58mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:
    #d20000 PLA esFIL PLA 850 Red  Transmission Distance: 6
    #000000 PLA Generic PLA Black  Transmission Distance: 2.2
    #4c5f71 PLA Jayo PLA Gray  Transmission Distance: 4
    #ffffff PLA Winkle PLA HD Blanco Glaciar  Transmission Distance: 2

This print uses 4 unique filaments

Swap Instructions:
    Start with Red
    At layer #8 (0.72mm) swap to Black
    At layer #18 (1.52mm) swap to Gray
    At layer #24 (2mm) swap to Blanco Glaciar for the rest.

---------------------------------------

You can find my HUEFORGE models here: https://makerworld.com/es/collections/5516891-hueforge

The final result will depend on the filament used and its TD. Please adjust the layers in Bambu Studio if your filament has a very different TD for a better result.

---------------------------------------

You can find my PUZZLE models here: https://makerworld.com/collections/6089094

----------------------------------------

You can find my "I LOVE" style skyline plates models of different cities here: https://makerworld.com/@luckyfer/collections/5582296-skyline

The size is 150mm base x 50mm height. If you modify the dimensions in the slicer, I recommend changing the values of the X/Y axes, but keeping the dimensions of the Z axis.

I hope you like the result.

------------------------------------------

You can find my keychain models here: https://makerworld.com/es/collections/5572814-llaveros

Thanks for your “likes/boosts”. :)