Search models, users, collections, and posts
Kitchen Table
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
15.2 h
3 plates
Open in Bambu Studio
Boost
145
441
4
4
293
90
Released
Description
Description:
A compact and practical table, ideal for small spaces, workshops, garages. With its dimensions (23×25×21 cm), it fits even in places where space is really limited.
Features:
- Space-saving – perfect for small rooms or tight corners
- Simple and sturdy design
- Easy to print with no need for supports
- You can adjust the size in your slicer according to your printer’s build volume
Printing Tips:
- Recommended material: PLA or PETG
- Infill: 15–25% for standard use
- No supports needed
- When using infill - grid, the nozzle may occasionally scrape against the infill. In this case, reduce the print speed to 50% (even with this setting, the nozzle may still scrape, but there’s a low chance of the infill breaking) and I recommend performing manual bed leveling of the print bed after the print is complete. https://wiki.bambulab.com/en/x1/manual/manual-bed-leveling
I printed with grid infill, but I recommend using gyroid infill instead. - There is an option to use a 15mm thick wooden board.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)