Stylized Chess Set - Free 3D Print Model

Search models, users, collections, and posts

29FLO

Toys & Games>Board Games

IP Report

Print Profile(6)

All

P1S

X1 Carbon

H2D

A1 mini

P1P

P2S

X1E

H2D Pro

H2S

H2C

X2D

A2L

0.12mm layer, 4 walls, 30% infill

Designer

9.1 h

1 plate

4.9(233)

Resized, custom supports, fitted to full chess set

32.9 h

12 plates

4.9(33)

2 piece Knight (Better Result/Success) 0.12mm layer, 2 walls

25 h

6 plates

5.0(21)

Custom Supports+ Big base Knight, 0.2mm nozzle

34.2 h

1 plate

4.9(29)

Click to see more

Open in Bambu Studio

Boost

6064

14056

497

503

10.7 k

3.5 k

Released

Description

Edit: There is Knight piece with wider base in “files section” as an additional STL file.

All my photos are REAL and show an actual 3D-printed figure photographed by me.

If you're interested in the commercial use of my models, or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. Thank you!

[ Suggested Print Setup ]
Nozzle: 0.4mm (recommended 0.2mm nozzle or Resin Print)
Layer Height: 0.12mm ( You can adjust the layer height based on how much detail you want )
Infill: 30% or more for nice weight
Wall loops: 3
Supports: Tree (auto)
Printed with: Bambu Lab PLA Matte Charcoal - Painted with Metallic Paint

As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.

Boost Me (for free)

If you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊

Comment & Rating (497)

@user_325803743

Boosted

Is there a reason why derivative works are not allowed? I created a full chess set that includes these pieces with some modifications, case for the pieces, board, and a box. But MW doesn't allow me to upload it because when I try to mark this project as source, it says derivative works are not allowed.

@stampa3dAVstudi

Boosted

Wow, this box is beautiful, I can't find it anymore, how come

Show original

@user_325803743

Boosted

Replying to @stampa3dAVstudi :

Hello, the box is not uploaded because I first need @29flo , the creator of these chess pieces, to change licence into one that allows remixes. I cannot upload just the box since I did some chess piece resizing and they need to match the box exactly.

@user_325803743

Boosted

Replying to @stampa3dAVstudi :

Boxes are uploaded as "Chess full set" project: https://makerworld.com/en/models/1931306-chess-full-set

@user_1097705307

These printed out great! I remixed the Knight, to give it a bigger base.

@Frixon

Boosted

Would you be willing to share your remix? I think the knight looks awesome with the bigger base!

@SEB65

Boosted

Yea, I did too. Just a simple cone upside down and fused

@SEB65

Boosted

Are these painted?

@deniz66

Boosted

Print Profile

0.12mm layer, 4 walls, 30% infill

Perfect Thank you for the wonderful design

Show original

@Misterobots

Boosted

Would you mind providing us your support settings? It looks like the supports removed very well from these. Thanks!

@deniz66

Boosted

Replying to @Misterobots :

I used the designer's profile. I used Elegoo PLA Matte filament. I hope this helps

Show original

@user_2209693353

Replying to @deniz66 :

What paint did you use? looks great

@Marko_Polo

Boosted

Need help, all figures are printed perfectly, only the Knight (Horse) is always coming out with bad noise, that is falling out.

@Marko_Polo

Boosted

Printed on A1, 0.4 nozzle and B.L. PLA Matte

@user_925343307

Same issue with me printing with .2mm nozzle at .08 layer height. Tried slowing printing down. Tried stronger supports. Always fails at the nose though

@Misterobots

Boosted

Replying to @user_925343307 :

I can never seem to dial in support settings with a .2 nozzle. I tend to get worse "noise" with it. I'm also attempting to figure out the support settings for best results on .4 nozzle. I've printed with both .2 and .4 on the pieces. From what I've seen, there is very little gained from a .2 nozzle, mostly because the support removal, are very difficult to completely remove without scarring. I've added some photos to try and demonstrate some differences (or lack of them). 1-2 Kings: .2 Nozzle-.08 Layer Height-No Supports(Left) and Profile Defined Tree Supports(Right)-Bambu Silver PLA Basic 2-Bishop: .4 Nozzle-.12 Layer Height-No Supports-Overture Matte Black PLA 3-King: .2 Nozzle-.08 Layer Height-No Supports-Bambu Silver PLA Basic 4- King: .2 Nozzle-.08 Layer Height-Profile Defined Tree Supports-Bambu Silver PLA Basic 5- Queen: .4 Nozzle-.12 Layer Height-Tree Supports with PETG Interface-Overture Matte Black PLA 6- Rook: .4 Nozzle-.12 Layer Height-No Supports-Overture Matte Black PLA

(Edited)

@user_258182411

Boosted

Thank you so much for this amazing model. this was super easy to print and I really enjoyed painting each and everyone with metallic marker. I also bought an xl board for the correct scale because the peices are a little bigger than average. this project easily deserves five stars and a boost

@user_3863978103

silly question but how did you print all a the chess pawns without doubling up on the other pieces (very new here)

@user_258182411

Boosted

if you have Bambu studio you can open the project there and copy, delete, and paste the individual pieces.

@user_741309736

what board size is this?

@Edbart

Boosted

Great design. Prints just fine with .4 nozzle. Wife is super excited for the set to be complete, once the painting is completed.

The designer has replied

@29flo

Looking great! Thx for sharing

@user_2409466945

Boosted

what paint did you use? I printed these in black and gray but want to paint them! thanks

@Edbart

Boosted

Replying to @user_2409466945 :

I used a black base primer and then utilized a two tone with “glitter” - I think it was Crylon brand. can’t remember off top of mind.

@HobbyShack

Boosted

Print Profile

0.12mm layer, 4 walls, 30% infill

Nice chess set! Printed out nicely except for the knights, which I had to print a few more time to get a successful print. Outside of that everything else printed on the first try on the H2C. In addition I printed out the modular chess board, and a case that I designed, that stores everything. Will be a nice Birthday present for my grandson. The chess pieces were finished with Gold and Silver Leaf Rub n Buff.

@bchuter

Boosted

Print Profile

0.12mm layer, 4 walls, 30% infill

Absolutely love these! They print out great on 0.2 nozzle One small request would be to flare the bottom of the Knite like the other models. It’s the only model that does not have a large footprint/flare at the bottom. When printing at 60% of the original size to fit a smaller chess board the knite’s topple over easily with their narrow bottom.

The profile uploader has replied

@ericberc

Boosted

@29flo I double this. IF you are a serious player, the Knight is a little bit unstable with that smaller bottom. It would be great to redesign it, and enlarge the bottom to match the bottom size of the others, ar least the bisshop base. Thank you very much!!! (If you do it, I will definetly give you 2 other boosts ;) ) THANKS!!!

(Edited)

@29flo

Replying to @ericberc :

@bchuter @ericbrec Ive just uploaded Knight v2.stl with wider bottom. Happy checkmating! :)

(Edited)

@ericberc

Boosted

Replying to @29flo :

Will boost you tomorrow. Please, send me a message to remember. THANK YOU!!!

(Edited)

@3dToppers

Boosted

Print Profile

0.12mm layer, 4 walls, 30% infill

I made this set for my dad's 70th just a few days ago he absolutely loved it 😊 thank you soooooooo much for such an amazing set. it is absolutely fabulous and once I have some boosts I will certainly find you and boost you for sure it is well and truly deserved. "although my dads only suggestion is that the Knight needs to be smaller than the bishops"

(Edited)

@DebbieO

Boosted

Print Profile

0.12mm layer, 4 walls, 30% infill

Very nice set! Printed in Bambu Basic PLA black. Finished with antique gold Rub n Buff. The white set it currently printing and will be finished with silver. I printed this chess board with black, white, and dark grey. https://makerworld.com/en/models/1533495-chess-board-42mm-squares#profileId-1608366

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Regnum Chess Set

Danny_07

11.6 k

5.7 k

Chess Set Medieval Stylized

29FLO

2.6 k

1.6 k

Minimalist Chess Set | Foldable & Portable

ERAVIA

21.7 k

12.2 k

Pokemon Chess Set

Sifusan

3.8 k

3 k