Skeleton Cat

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 112.73x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA Bambu Basic Black Transmission Distance: 0.1
    PLA BambuLab Basic Blue Gray Transmission Distance: 2.6
    PLA Bambu Basic Light Gray Transmission Distance: 1.1
    PLA+ Esun Bone White Transmission Distance: 4.9
    PLA Bambu Basic Jade White Transmission Distance: 6.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (0.68mm) swap to Blue Gray
    At layer #21 (0.96mm) swap to Light Gray
    At layer #24 (1.08mm) swap to Bone White
    At layer #32 (1.4mm) swap to Jade White for the rest.