Eule_2

Print at 100% infill with a layer height of 0.08mm and a 0.16mm base layer

The model measures 112.5 x 200mm
Higher layer heights may be used below the minimum depth of 0.48mm
The maximum depth is 2.2mm, with an actual depth of 1.8mm

Filaments Used:
    Bambu Lab PLA Basic Black, Transmission Distance: 0.6
    Bambu Lab PLA Basic Red, Transmission Distance: 4
    Bambu Lab PLA Basic Yellow, Transmission Distance: 6
    Bambu Lab PLA Basic Jade White, Transmission Distance: 5

This print uses four unique filaments

Swap Instructions:
    Begin with Black
    Swap to Red at layer #7 (0.64mm)
    Swap to Yellow at layer #9 (0.8mm)
    Swap to Jade White at layer #11 (0.96mm) and continue to the end

.

.

If you enjoy my work, please like and follow me; I would greatly appreciate it