insert press with adjustable angle

I needed an insert press with adjustable angle, so i create it

this it the components you need:
m3x4mm x22 inserts, but longer can work

m3x8mm screws x22, aliexpress

m6x10mm screw nut 1x

m6 screw longer than 7mm

m3 screw longer than 15mm, for comparator

6x1mm 6x magnets, i used glue to lock it

21,3mm (½ inch) steel pipe

i recommend you this glue, it's the best glue i tried for 3D printed part

i glued 2 components, degree knob at worm gear and the top and base lock screw

i filled the base with gravel

if you need to change something i upload the f3d and step files, or you can ask me

i hope this project can help you :D