Socket Set Latch BGS

German Text:

(English Text after the German Text)

Thank you very much for downloading my model – I am truly delighted!

This is my very first upload, so please bear that in mind when rating it. 😊

If you like the model, it would be fantastic if you could like, rate, or even boost it – this really helps me and motivates me to share more models in the future!

This is a replacement latch for a BGS socket set or toolbox.

This part is designed to replace broken or lost original latches and restore full functionality to the case.

✅ Designed in Fusion 360

✅ Easy to print – no supports needed

✅ Tested with PETG – not recommended with PLA, as it is too brittle

✅ Please be careful during installation – the middle tab can break if excessive force is applied

✅ Best results are achieved with an increased wall count to reinforce the tab

✅ Installation may require some patience – press evenly and avoid using excessive force

I am eager to hear if it fits your case – feedback is most welcome!

English Text:

Thank you very much for downloading my model – I really appreciate it!

This is actually my very first upload, so please keep that in mind when leaving a review. 😊

If you like the model, I’d be super happy if you could like, rate, or even boost it – that helps a lot and motivates me to share more in the future!

This is a replacement latch for a BGS socket set/toolbox.

Designed to fit common BGS tool cases, this part can be 3D printed to replace broken or missing latches.

It snaps in place and restores full functionality to your toolbox.

✅ Designed in Fusion 360

✅ Easy to print – no supports required

✅ Tested with PETG – not recommended in PLA, as it’s too brittle

✅ Mounting requires care – the middle tab can break during installation if too much force is applied

✅ Best results with increased wall count to strengthen the center tab

✅ May take a few tries to install correctly – press evenly and take your time

Let me know if it works for your case!