Rocket feeder
Print Profile(2)
Description
Very easy and simple 3d print for a rocket feeder.
Non printable parts:
Spring compression type 9.0x15mm wire thickness around 0.6mm
Spring compression type 6.0x19mm wire thickness around 0.5mm
The smaller spring should be glued with strong glue in one of the nests
3d printing, the connecting rod, nut and the button should be printer flat on the bed with tree supports. For the nut and the rod you will need 0.2 mm nozzle with 0.06mm print height. The button could be printed with 0.4 mm nozzle. The body part could be printed with 0.4mm nozzle, I used 0.4mm nozzle with 0.2mm layer height and tree supports + 4mm outer brim. I will upload pictures how the parts should be positioned for easiest printing and maximum strength.
IF YOU DONT HAVE 0.2mm nozzle, you can use 70mm long 4m bolt with nut
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)