Print Profile(2)
Description
Monotub kit for growing gourmet mushrooms!
You will need a 55mm (1 3/8") STEP drill bit. Drill 3 holes on near the growing surface on both long sides. Drill 1 hole on both ends near the top. Insert both sides of the hole cover and twist on, for each hole. Then plug with the TPU plugs. When it's time to start growing remove the plugs and cover with paper tape, micropore tape.
If you want to use the Template and Trays you will need a Sterilite 27-Quart Latch Storage Tote. The Template is for an UPSIDE DOWN design! as seen in the photos. This makes harvesting your gourmet mushrooms much easier. You should also print the trays if you are using this design. The Trays are on the 2nd print profile because they print in VASE mode and require a bigger printer. I chose vase mode because the tray's are mostly like only going to be for single use.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)