xinghe

cover

c2c7618843359cd63a06f94777cec81.jpg

5190bf7c32b018e81efa416967f56b0.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

2025-02-02_207295ee5f44e.jpg

<p>我打印的是20%填充，重量还可以，填充不能少了，你们可以适当增加填充，但是打印时间也会增加，否则掉地上容易坏，装配没有公差但是我装配起来还是有点送，用胶水固定那个空位处，就稳固了很多。</p>

<p>I printed with 20% infill, the weight is acceptable, but insufficient infill will compromise structural integrity, so consider increasing it, though this will extend print time. Otherwise, it's prone to breakage if dropped.  Assembly requires no clearance, yet I experienced slight looseness during assembly. Applying adhesive to the gap significantly enhanced stability.</p>

0.2mm layer, 2 walls, 20% infill

Beer rack

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models