good project, I slightly modified it to accomodate my Topcube enclosure with that special fabric instead of sturdy plates so I cut in Bambu Lab Studio. one copy to get just a flat square washer with 4 holes which is placed above the enclosure top, and the normal one holding connectors is screwed together below the top cover. this way I got very good assembly to the Topcube enclosure.

excellent design, standing firmly on top of my A1, still good to drive pfte tubes above towards the shelf with fry boxes, solved my workflov easily.

Beautifully and accurately designed naval cannons. I scaled them down to 38% since than they fit my 1:60 scale sailing ship models and printed in PTG and PLA+ all shown down in my picture. Very good print profile, printed flawlessly. Thanks for this project.

Doing great with the 3D printed manual feeder, I ordered ball bearings to fit these feeders, but while I was waiting for a delivery I printed out these parts and... surprisingly they are doing excellent almost no need for an external hardware. Anyway once I get ball bearings I will probably replace plastic parts to make it more sturdy and reliable on a long run, but I am quite sure this simple solution will be absolutely fine for a decent period of time.

absolutely beautiful, works like a charm, prined flawlessly directly from Bambu mobile app with given profile , black PETG filament. I am going to print a bunch of these to easily exchange inputs to my BMCU 370C

Great model, accurately printed even when I reduced to 60% scale to fit the scale of some of my ship models.

Simple, time saving, efficient Ikea Samla 22l box clips. Flawless printing with PLA HS.

Beautifully designed and profiled Bambu LAB A1 toolbox. Flawles printing, using whit/ grey PLA High speed filament, with 0.4mm nozzle on A1.

Excellent design for securing AMS print hub. Printed quickly, flawlessly, it perfectly fits print head top openings securing the holder very tightly. I like this design.

This is great addition to my newly printed Cell spool re-winder. The original one fits perfectly for Bambu Lab original spools width, this one with 52mm width perfectly rewinds the most of non Bambu spools which are a bit narrower. Now I use both sets depending on which spool I am rewinding on.

Simple, fast printed, well designed, fit well to my A1 side, good profile.

Excellen print profile with a variation for a newer models of A1 which does not have 3 holes for mounting. Fits perfectly to my A1

Great profile, the original one I first printed was too small for power cord connector, this modified version is a perfect fit.

Nice add-on and improvement to Bambu A1. I only had to change the end part with the modification with a wider power cord connector hole, the original one was too small to fit my power cord.

Beautiful print profile and design for a power cord chain guard. Printing was smooth and flawless.

Nice print profile, done without any problems and it's a great upgrade to my A1 printer.