New Pinecil Bento module: Strap Base. This thin base lets you thread a 25 mm strap around your Bento stack and close it with a 25 mm buckle or clasp. It also has space for 4 silicone feet, so the stack has a softer, non-scratch bottom. Useful for taller stacks or transport, where impacts can separate the magnetic modules.

New Pinecil Bento module: Desoldering Level & Hot Iron Holder Arm. This optional stack level adds storage for a compatible desoldering pump, desoldering wick, and a pivoting holder arm for short-term use while soldering. It uses 11x 6 mm x 2.6 mm magnets, 1x 608 bearing, and 1x M4x16 screw. Part of the modular Pinecil Bento soldering kit system.

New Pinecil Bento part: a compact tip cleaning sponge holder. This is a smaller substitute for the standard Pinecil sponge holder, designed to hold only the cleaning sponge inside the base Bento setup. Recommended material is ABS or ASA for better heat resistance, although the hot tip should never touch the printed plastic.

New Pinecil Bento module: Omnifixo Holder Level. Designed for the Omnifixo OF-M4.4 large kit, this stack level stores the 4 magnetic feet and helps hold the base plate in place. It uses 16x 6 mm x 2.6 mm magnets total and requires supports for the perpendicular foot sockets. A compact way to carry Omnifixo parts with the rest of your Pinecil Bento setup.

I made Pinecil Bento: a stackable, bento-style case for Pinecil soldering kits. Instead of making a simple tube or box, I wanted something modular: one compact stack for the iron, tips, cable, and small accessories. It is meant for desk storage, tool bags, repair kits, and anyone tired of loose Pinecil parts floating around a drawer. Feedback is welcome, especially on accessory layouts and compatibility with different Pinecil setups.