This is a disassembled version, not recommended for direct printing. It's provided for assembly reference and for experienced users to disassemble themselves

Disassembled version v1.0 0.08mm layer height print

0.08mm layer, 2 walls, 15% infill

0.08mm layer height, 2 walls, 15% infill disassembled version

Disassembled Version - 0.2mm layer height, 2 walls, 15% infill

Disassembled print version

Print-in-Place version

Disassembled parts v3.0, optimized the issue of not being able to snap into the model

0.12mm layer, 2 walls, 15% infill

0.16mm layer, 2 walls, 15% infill

0.16mm layer, 2 walls, 15% infill

Updated the parting effect; the legs can be directly snapped into the main body

0.08mm layer, 2 walls, 15% infill, split parts

Modified the split parts to prevent spaghetti, 0.08mm layer height, 2 walls,

0.12mm layer, 2 walls, 15% infill

0.08mm layer, 2 walls, 15% infill

0.08mm layer, 2 walls, 15% infill

0.12mm layer, 2 walls, 15% infill

0.12mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill