printed in PLA black and bronze. came out pretty clean.

printed clean even using PETG

printed nicely in PLA and PETG

printed on bronze PLA on the outer shade and black for the base. looks awesome!

Printed in PETG and worked great to stand up a Skadis board.

excellent fit in the Bambu plastic spools. have printed one for every spool that I have.

does the job keeping the bmcu moving smoothly on the top frame. printed excellent on PETG I did have the change the cable guide I was using for the print head - on the upper positions it was hitting the bmcu. something to watch out for when you mount this.

printed one for each of my polyboxes a d came out great.

Works excellent. Had to print three times to get it out properly. The first two times I printed with PETG and it didn't print properly via the Handy app, but printing it with PLA printed fine.

printed this for the A1 and works excellent. Needed something that pointed the cable forwards instead of up as it was interfering with the AMS on the top.

This rating is based on the 5 item, regular fit, no logo print profile to be clear. The clip work great for attaching to the spools, but the filament will not pass through the hole like any of the pictures show. Only with a lot of force will the filament (Bambu PLA basic) get to about half way into the clip. this is the case for all three spools that I have. So the clip works well, but not quite as advertised.

printed in pla and worked out pretty decent. I did reprint the motor housing fitting as it has printed with brims and I had no idea how to take it apart.

cool little fidgit toy.

got the light kit as part of my a1 order. printed excellent and looks awesome.

printed excellent on a super tack plate with one color.

works excellent for an a1 without ams.

excellent print and holds my plates perfectly.

So I think the idea and execution are excellent overall. With that said, the clock kit that came with my printer doesn't work. The thread on the kit doesn't extend far enough or the model is too thick so you cannot use the nut to affix the clock body to the print. As a result, the clock wants to fall out.

fantastic design that I did as my second print after the benchy. Wife loves it.