This was a quick TPU test print with the new Bambu TPU Feed Module from my TPU drybox feeder, through the module, and into my P2S. Printed great with SUNLU TPU95A.

Printed a set using PLA springs, and PETG springs. Everything else was printed in PLA

Cool. Printed a set in SUNLU PLA+2.0 HS and OVERTURE PETG Basic. Not much difference in spring feel.

Printed perfectly with SUNLU PLA HS gray. Currently printing from a TPU drybox, through the Bambu TPU Feed Module, and into my P2S to make a TPU zip tie. The module fits and feeds as designed, and my P2S printed the TPU filament perfectly and without effort.

Too easy. Printed perfectly using SUNLU PLA+2.0 HS gray.

Wanted, not needed. Printed well with OVERTURE PLA Matte white and SUNLU PLA+2.0 HS.

Neat! Printed perfectly with OVERTURE PETG light gray using design file and filament specific settings.

Beautifully printed gaskets for the D3P AMS2 Riser for the P2S. Flawless with file and filament specific settings. Printed with OVERTURE HS TPU95A from a Praki drybox filament feeder directly into the external spool filament inlet to keep it dry from spool to extruder. Perfect setup. Perfect results.

It works as designed. As noted by the designer/creator, I'm gonna reprint in PLA for a nicer look. I'm petty. This first print was with OVERTURE PETG. it's not pretty, but it's definitely functional feeding PLA. TPU, Idk. A PC4-M10 fit the single end almost too loosely, while the near non-existent threads for the double end wouldn't easily accept the PC4-M10s. I need the PLA to print better.

I've been able to successfully print a proper slip on plate by printing with Bambu PETG-HF with Bambu [Support for PLA/PETG] filaments as the support element with the recommended support and temp settings. Purge volume is critital to not contaminate the PETG with the support filament. The finished product comes out perfect. Just peel away the supports and install. No post processsing needed as when I printed with regular PLA supports.

Nice print✊🏿 Printed with SUNLU PLA HS black, Bambu PLA red and mistletoe green, and Amolen PLA Silk dual color black and gold.

Printed great✊🏿 Printed with Bambu PLA red and mistletoe green, Amolen PLA Silk black and gold, and SUNLU PLA HS black on a P2S/AMR2 with filament specific settings.

Beautiful print. Almost flawless. Fits well. Printed with my very last spool of Sunlu PLA black using SUNLU specific settings.

Prints great slowly. Upscale to 8"x5.5" to be used as front and back covers for green log books, secured with rubber bands or 550 cord. Printed with OVERTURE PETG gray and SUNLU PETG black. Rubber bands holds a sharpy/mechanical pencil.

Beautiful print. The lid slides in perfectly. Printed with OVERTURE PETG light gray using manufacturer recommended print settings.

Beautiful print with SUNLU PLA HS black. Flawless. hrygrometer snaps right in. Good to go. Update: They are more delicate than I thought. Still beautiful though. Dropped on carpet from two feet and broke in half. Will print the next ones a tad stronger.

Printed perfectly using SUNLU HS PLA gray and their specific filament settings.

Initial print, Bottom layer too thin. The bit popped through without any effort. Likely could be fixed in prints settings.