The box works great and feels durable. Unfortunately, all the cards that came in my standard rivals set do not fit within the card section. :(

Didn't want to try printing again, but my P1S didn't like printing the pill-slide cover in a separate color. Made a bird's nest around hinge points.

I would like the cap to be a bit tighter on the tolerance (bit too lose of a fit); however, I have not put in a tpu seal under the cap to see if that helps hold it in place.

Might want to measure the diameter of your tea light before printing. Mine did not fit.

Seems too loose for all my M3 size holes.

I also (like other comments) had to scale down to 80% to fit my glasses.

Print great and very aesthetically pleasing. With the diamond cutout blade, it is def weaker and broke along layer lines after my kids wanted to stab some cardboard w it. Suggested: if kids are going to play w it, use at least PETG.

Great looking piece. It fits in the hand well. Def not comfortable if your kids want to stab cardboard boxes w it. lol

scaled down to fit in one hand comfortably, but prints nicely.

Super tight to connect upper arm armor piece over inner structure, but it fit with a bit of elbow grease. ;) Great model.

This thing is awesome. Great job! Idk what other people are talking about: it is balanced, prints super smooth, and has the needed supports for printing. Your profile worked great at full scale. I'm sorry people are complaining when they don't use supports, brims, or just want to spend the time on the separate plates. Thank you for the options in the profile; def deserving of a boost!

Prints fine. Design is very close to original, just not exactly the same.

With prescribed print orientation, the front of the riser does not print well and the rear (overhanging portion) snaps along layer lines as pressure is applied downward. Recommend printing with one side (e.g., right) down and a raft to create layer lines along the front-back axis of the riser.

Great box and print. Please center the tabs and lid so that way it can go on either direction.

Ironing on top surface really makes these look trick! Great job.

Works perfectly. Only recommendation is to provide additional print profiles with different magnet sizes.

Super easy and beautiful print. My only qualm is that the lid comes out of the track occasionally. I think ever so slightly increasing the track's lip would alleviate this tendency.

I think it may be better to fully recess the letting on the logo, but I love this box.

I know people want it thin for its function as a bookmark. But I think this things longevity is skeptical given just how thin it is. I love the idea and am using it. I just scared at every turn it is going to break.

Printed perfect. The TPU inner is super tight and I had to glue it down to the sides to prevent it from bending up. Idk if that is due to swelling of the material, but overall it is great.