Sweetner Table Holder
Print Profile(1)
Description
Saw a similar item at a country Diner, thought it would make a great addition to the table for coffee or tea.
Assembly:
1. Fold the upper part right when it comes off the printer while it is still hot, this works the best. you can lightly hit the corners with a torch if you desire but isn't needed as all the edges are covered with the base. if you need to you can use a heat gun or a hair dryer to soften the edges as well. No Need to Glue anything
2. Insert in to the base: can glue in, if you desire for it to be permanent.
3. Install TPU Buttons on the bottom (optional). it's a nice touch but not really needed if you don't have the TPU.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)