Print Profile(0)
Description
It is recommended to print this with a brim with at least 4mm of brim to give better bed adhesion.
I also added a stronger version of this model included in this post if you are a little more aggressive with your joystick.
IMPORTANT: This extender fits well on 18mm diameter joysticks, so if you have a joystick bigger or smaller that that you will have to scale the model to fit the diameter of your joystick. To do this, there are 3 Steps.
1: Find the diameter of your joystick in mm
2: Divide that number by 18 (e.g. If your joystick has a diameter of 16 mm, divide 16 by 18 to get .89)
3: Take the number that you get, move the decimal point two times to the right and this is the percentage that you have to scale your print to in the slicer (e.g. .89 →89% )
Happy printing!
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)