Grian Chatten

I got asked to create a Hueforge of  Fontaines DC lead singer Grian Chatten on stage.

Picture provided is a bit blurry but the Hueforge came out ok.

Project: grian chatten hueforge 200x150.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150.4mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.4mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #18 (1.52mm) swap to Jade White for the rest.
 

Overture Red works well as a substitute for BambuLab Basic Red

Overture Red Transmission Distance: 4.8