IKEA Bergshult 80x20cm monitor stand desk riser

This is my desk riser for the IKEA Bergshult 80x20x2,5cm and 120x20x2,5cm (use three for the last one).

Keep in mind that there are also 30cm deep versions available of this shelf, which doesn't fit this model.

If someone has that shelf and could send me the exact measurements, I'll design a larger version too.

I was inspired by this model: https://makerworld.com/en/models/39540?from=search#profileId-199589 which is for a different shelf with less thickness, so I designed my own.

Print instructions:

• PLA is fine
• Standard layer height at 0.2, hit adaptive (without smooth) to get an overall layer height of 0.28 for faster printing.
• 4 walls minimum
• 15% gyroid infull
• no supports
• no brim 
• Doesn't fit A1 Mini

Ikea Bergshult: https://www.ikea.com/nl/nl/p/bergshult-plank-bruinzwart-30426285/#content