Drop Light Holder

Update: 2025-05-15

I've removed the bambu exclusive restriction and have set the license to allow remixes.

Warning: Use this at your own risk, I assume no responsibility for any damage caused in conjunction with this part.

I don't have a finished basement, but have been working out of it and wanted to upgrade my lighting, so I designed this to work with the recessed light listed below. The hottest operation temp I've observed is only 40°C.  Original Recommendation build was based on PLA and they did warp over time from the continuous load placed on them.  Replaced all them with PETG and have held up much better with no warpage.   First picture is latest print and profile with PETG.

Note:  There does seem to be a newer model of the light that came out.  The fit isn't as tight, but still works just fine.  Originally this was designed with the one that comes with a black box for the electrical.  New verison has a steel box. 

https://www.homedepot.com/p/Commercial-Electric-Ultra-Slim-4-in-Canless-Color-Changing-Integrated-LED-Recessed-Trim-All-in-One-Downlight-650-lumens-Dimmable-8-Pack-53808101-8PK/308959160?NCNI-5