jamesb

cover

Visor1_2048x.webp

Visor2_2048x.webp

plate_1.png

Screenshot 2025-04-19 173837.png

Screenshot 2025-04-19 173826.png

Updated v3.5 design for larger antenna boots used in 2025 and newer FT200s.<ul><li>Print without support</li><li>Use a light colored, UV resistant material such as ASA</li><li>Remove mouse ears after printing (discs around part to help bed adhesion)</li><li>Printing with some high temperature materials may require an enclosed printer</li></ul>

v3.5 for larger, 2025+, antenna boot

2024-09-04_9eb93cd09b489.webp

<ul><li>Print without support</li><li>Use a light colored, UV resistant material such as ASA</li><li>Remove mouse ears after printing (discs around part to help bed adhesion)</li><li>Printing with some high temperature materials may require an enclosed printer</li></ul>

v2b for smaller, 2024-, antenna boot on older FT200s

NOTE: The antenna boot changed in 2025 to a larger form factor. The 2025 and newer FT200s will need to use the FT200 Visor v3.5. 2024 and older FT200s can use either the v2b or v3.5 visors. This is a visor for the Flagtronics FT200 that helps visibility &amp; reduces glare in some vehicle applications. We recommend Bambu ASA or similar high temperature, UV resistant material in a light color. High Temperature adhesive is needed for a permanent installation on top of the FT200. Note: Pending newer installed pictures.

Flagtronics FT200 Visor

ASIA

Print Profile(2)

Description

Comment & Rating (0)

License

Related Models