Search models, users, collections, and posts
Dragon Skeleton
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
22.3 h
2 plates
0.2mm layer, 2 walls, 15% crosshatch infill
4.7 h
2 plates
Open in Bambu Studio
Boost
667
1218
67
42
1.1 k
365
Released
Description
dragon skeleton
If you like my snake skeleton then you will love this.
Printed on 2 plates, the head and wings print separately, joining the main body by a ball and socket joint.
while the 3mf is multi colour you can of course print as a single colour to speed things up.
ensure good bed adhesions before printing.
please do not mark the model down for poor bed adhesion, it is your responsibility to ensure you plate is clean. and if in doubt use a brim or glue.
some of the back parts of the body are small so good bed adhesion is essential. avoid fails with a brim or glue.
ball and socket joints arn't great with silk so i would avoid using silk filament.
i've printed in bone pla+ from sunlu with silver.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (67)