adjustable leg
Print Profile(1)
Description
9 points of adjustment interlocking leg.
Here I have a 9 point of adjustment interlocking leg, designed for a pipe NFT system.
I needed to raise the system up by 80mm on one side and then level it out on an unlevel gravel floor.
This leg has 4 points of contact (first one only had 2 and was a little rickety so I went with 4) which twist into the slots locking it firmly in place. I am extremely pleased with how sturdy the leg is and how nicely it fit the pipe.
Measurments:
will fit a 39mm diameter pipe
min hieght when closed is 95mm
max height on top slot is 165mm
This can be scaled as required to fit other diameters of pipe. Howeve, the min and max heights will adjust also.
Printed in PETG as its in a greenhouse and can handle the heat better.
I hope this is useful for you all.
Happy printing
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)