Clockwork uConsole HackerGadgets Antenna Support

This is a slip over antenna support for the Hackergadgets AIO antenna rail. I broke off an SMA while storing the uCOnsole in my bag. There are other supports out there, but most were not very heavy duty and also were too thick at the attachment points to use the kickstand, I labeled the SMA ports to my setup, but you don;'t need to use the 2 color I have set up. This is very solid printed in PETG. 

Enjoy and give me a boost since this cost a lot of time and filament to design and test print. STEP file is also in file folder so you can modify as needed. 

The kickstand work but will not fully extend due to the bolt size and thickness of the support at 2mm. It works but will not lock 100%. 

You sill need longer 4mm bolts.

Here is what I bought on Amazon. 8mm match and match 100% to the recent OEM screw heads. 

https://a.co/d/04ZiQTeG