Printer Number Labels

Just a simple way to identify my printers by number. I used two 6x2 magnets for each printer label and lined them up to match the positioning of the door hinge screws. I am using them on the following printers, all of which have the same spacing for the hinge screws: P1S, P2S, H2S, and H2C. 

A few notes before you print:

1.  I used the ironing settings that work best for my P2S. Please be aware that it may not be the best ironing for your particular machine. If the top surface does not turn out the way you want it, or if you just don't care to have ironing enabled, you can toggle it off in the Quality tab on Bambu Studio. 
2. My 6x2 magnets fit snug and require some force to get them into the holes. No glue is required. I'm sure there is some slight variance among different brands of magnets, so you may want to test one label first before printing an entire set. They are pretty light on filament, so it shouldn't be a big deal anyway. 
3. If you select Customize, it will take you to Make My Sign, which will remove the magnet holes and text. Only go that route if you want to start from scratch. 
4. The file is easily modified in Bambu Studio as to the text and magnet holes. If you want other text, simply access it in the objects list and change it. Same for the holes. If you want them to be bigger or smaller, find them in the objects list and change the dimensions. Just be sure to uncheck “uniform scale” so you don't inadvertently change both diameter and depth without meaning to do so. If you keep them in the same location, they should still line up with the hinge screws, even with the changing diameter. 

I hope you find this useful. If you do, please rate, review, leave a pic, and/or drop me a Boost. Thanks!