Rotating Storage Box

Model Introduction:
This is a highly creative storage box. Simply rotate the top handle, and the 5 surrounding sub-boxes will pop out radially, allowing you to store your beloved small items; rotate the handle in reverse, and the 5 sub-boxes will automatically retract into the main body, effectively saving desktop space. You can also, like me, print the sub-boxes with different colored filament to make it even more beautiful!
It combines practicality, aesthetics, and fun, making it an excellent desktop companion! Welcome to download and print!
All parts of this model can be 3D printed, no additional accessories are required.
Installation Steps:
This model contains a total of 6 types of parts, 14 in total, with specific names detailed in the image below.
Chinese Annotations:

English Annotations:

Specific Steps:
1. Place the "sun gear" onto the central shaft of the "chassis";

2. Place the "edge gears" onto the 5 shafts on the edge of the "chassis";

3. Place the "sub-box" onto the vertical rod of the "edge gear". Note that after placement, the outer edge of the sub-box should be roughly circular, which can be achieved by adjusting the angle of the "edge gear". The final effect is shown in the figure below.

4. Align the buckles and cover with the "top cover";

5. Finally, cover with the "top part", and you're done!

Please enjoy!

Welcome:
PS: Feel free to visit my homepage often, you're sure to find something you need (●'◡'●) 
Homepage link: https://makerworld.com.cn/@Pbreak