Hexagonal prism
Print Profile(2)
Description
Warning: Make sure, that you are putting right tile into the right slot
This is a fully 3D-printable twisty puzzle based on standart 3*3 Rubic cube but this in shape of hexagonal prism. The model is engineered to be assembled completely without screws. No MMU/AMS is required for printing.
Performance Notes:
- Turning: The puzzle turns very smoothly once properly assembled and broken in.
Tolerances: It does not corner-cut and can feel slightly unstable during solves, but the mechanism is secure and does not pop.
Assembly & Post-Processing Tips:
- Cleaning & Sanding: After removing supports, make sure to lightly sand any surfaces where supports were attached to achieve flush joints.
- Assembly & Lubrication: Start assembling the model. Just before inserting the final pieces, apply lubricant to the cube's internal mechanism. Once the cube is fully assembled, perform several turns on every side to distribute the lube evenly and ensure a smooth turning experience.
- Tiling: Even if the tiles look like square, they are rectangles with little diferences of lenght of side. Ensure that you are putting right tile in right orientation.
Assembly instructions:
Step 1: Connect core with the side center pieces (make sure they are fully engaged)
Step 2: Put the stake through the core and attach the bottom center piece
Step 3: Assembly whole bottom layer
Step 4: Insert the middle edges
Step 5: Assembly the whole top layer without the center piece
Step 6: Snap the top center piece
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (14)