Search models, users, collections, and posts
Tower Hydroponic System
Print Profile(2)
0.2mm layer, 4 walls, 15% infill
Designer
59.2 h
8 plates
0.2mm layer, 2 walls, 15% infill
Designer
1.7 h
1 plate
Open in Bambu Studio
Boost
351
1232
10
5
145
23
Released
Bill of Materials
Bambu Filaments
Select all
Description
Hello and welcome to my second release of a hydroponic system.
This version is a free-standing vertical bucket type.
Pictured in green is a previous iteration of this system, featuring three cups per level which I believe is too many unless the intention is to grow something like lettuce.
The current version has two cups per level which is the brown system in the pictures above.
CHANGE LOG 14/6/26:
Net Cup Print Profile added.
Bridge section added to each of the net cup ports for reduced print time, can be easily removed with a sharp knife.
Features of the current version (brown):
- Height of 925mm
- Base flange size 245mm
- 18 Net Cups
- 12mm centre feed tube
- Tie down points, for transporting and windy environments (remove bridge/skin at each of the four top tie down points)
Mains plug access port (remove thin wall)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (10)