Parametric Gridfinity Hex Bins
Print Profile(34)
Description
Parametric Gridfinity Hex Bin with Honeycomb Walls & Magnet Support
A fully customizable Gridfinity-compatible storage bin with a striking honeycomb wall pattern. Configure grid size, height, hex pattern, and margins directly on MakerWorld – no code editing required.
Boost Me (for free)
Boosting helps me afford my filament. I really appreciate all of your support!
Features:
- 🧩 Gridfinity Standard - Snaps into any Gridfinity baseplate with precision-fit feet.
- ⬡ Honeycomb Walls - Parametric hex cutouts on all four sides for style, grip, and ventilation.
- ✂️ Clip or Skip - Choose whether edge hexes are cleanly clipped at the wall boundary or omitted entirely.
- 🔍 Sliver Filter - Set a minimum visible hex size so tiny partial cutouts are automatically filled in.
- 🧲 Magnet Ready - Optional magnet holes in the feet for a secure hold on magnetic baseplates.
- 💍 Solid Rings - Add solid bands above and/or below the hex pattern for extra rigidity.
- ⚙️ Customizable Online - Adjust grid size, bin height, hex size, wire thickness, wall thickness, and margins on MakerWorld.
Default Setup:
- 2×1 grid (fits 2 Gridfinity units)
- 42 mm tall bin with 1.6 mm walls and 2.4 mm bottom
- 10 mm hex holes with 1.2 mm wire between them
- Magnet holes enabled
- Side clipping off, solid rings off
Printing Guidelines:
- Material: PLA or PETG recommended
- Layer Height: 0.2 mm or finer for clean hex edges
- Infill: 15–30% is usually enough
- Supports: Not needed
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)