Desktop Pegboard
Print Profile(3)
Description
This solution applies to my designed "infinitely modular pegboard":
https://makerworld.com.cn/zh/models/779797
https://makerworld.com/zh/models/932107
This solution is suitable for light desktop use of the pegboard, in single-row or double-row assembly
This model consists of two types of modules:
1 Module A serves as a foot pad, available in three lengths For single rows, 60mm is recommended; for double rows, 80mm or 100mm is recommended
2 Module B is used to connect the upper pegboard, available in B2 and B4 versions
(The pegboard used in the demo photos is 200x200mm, Module A is 80mm long)
Accessories to be purchased separately: M4x12 countersunk screws and M4 nuts
2026-03-05:
Added Module C for table clamp installation
- 30mm supports table tops with a thickness of 0-30mm
- 60mm supports table tops with a thickness of 30-60mm
Using nano double-sided tape on the contact surface between the module and the table can enhance the fastening effect
2026-06-28: Updated to include new horizontally printed flat screws; this version can be chosen if vertically printed screws are difficult to screw in
Boost Me (for free)
If my model helps you, please consider boosting me. It's free for you, but it helps me a lot, thank you very much!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)