Fidget Toy: Toggle Switch

This is a design of an anti-stress fidget toggle switch!

You can print it in half an hour and immediately switch off your stress!

I have uploaded two profiles: One for the whole print, so you can finish it in 38 minutes in a single color. If you want the switch button in a different color, you can use the second profile, which prints separately the body (with the spring) and the button, so you can change the color you want!

Quick instructions:

1. Insert the spring inside the rectangular shaped cave of one side
2. Insert the button in the central hole of the same side
3. Close the box with the second side on the first one by pushing them together

I hope you will enjoy it… and Happy printing! :)

IMPORTANT NOTE:

I have taken the idea from the “Fidget Toggle Switch” by Krisswillcode (https://makerworld.com/en/u/2984547922).

It was so nice and cute that i wanted to make a personal version of it.

It’s not a remix because i have studied my measures, dimensions and tolerances.

Link of the Krisswillcode’s one: https://makerworld.com/en/models/66672#profileId-72089