Parametric Card box

🛠️ Parametric Card Box 

________________________________________________________________________________________________________________________
Edit: 15.01.2026.
-Big update to the parametric model. 
 
Parameters update and explenations:

• Card width
  This is the total width of your card in what oriantation you want
• Card Height
  This is the total width of your card in what oriantation you want
• Angle 
  This will make the box different angels from 90 to 40 degrees, so it can fit your space easier.
• How Many Dividers
  choose the  amount of dividers you want, this will expand the length of the box 
• Deck Thickness
  Measure your deck thickness  this will add to the length of the box.
   

Other updates.
more types of dividers, choose what you want and clone them in bambustudio and print..
_______________________________________________________________________________________________________________________

This is a fully customizable storage solution for trading cards (Magic, Pokémon, etc.). Unlike standard boxes, this design uses a dynamic trigonometric formula to ensure that your cards always have a perfect horizontal clearance, regardless of the tilt angle you choose.

📐 How to Measure for a Perfect Fit

To get the most out of the customizer, please measure your cards (including sleeves) as follows:

1. Card_Width: Measure the card from left to right. Add 1-2mm for a comfortable fit.
2. Card_Height: Measure from the bottom of the card to the very top. This ensures the box walls protect your cards.
3. Tilt_Angle: Choose how much your cards "lean." 90° is perfectly vertical; 45° provides the maximum lean 
4. Box_Length: Use the main slider to determine how many cards you want to store in a single row.

⚙️ Technical Specifications

• Slot Tolerance: Fixed at 2mm (optimized for standard and premium sleeves).
• Smart Spacing: The internal logic automatically calculates the maximum number of slots that can fit within your chosen Box Length without hitting the walls.
• Symmetric Design: The slots always grow from the center of the box to ensure perfect balance and weight distribution.

🖨️ Recommended Print Settings

• Material: PLA, PETG
• Walls: 3 for durability.
• Infill: 15%
• Supports: None required for the standard box.

🎨 Instructions for the Customizer

Use the sliders in the Bambu Lab MakerLab to adjust the dimensions in real-time. The model will automatically re-calculate the slot quantity based on your TiltAngle and Box_Length.