Keyholder Generator

🔑 Customizable Key Holder with Name (Parametric)

An elegant and fully customizable wall-mounted key holder, combining a functional key bar with a decorative nameplate. Generate your own model with your name and preferred settings!

✨ Highlights

*   Customizable: Choose the name, font, and size.

*   Adjustable Pins: Configure from 1 to 20 key hooks. Pin position and height are adjustable.

*   Smart Supports: The system automatically generates reinforced supports if pins are positioned too low on the plate.

*   Mounting Modes: Choose between "With Screws" (countersunk holes) or "No Holes" (for double-sided tape).

*   Two fonts available: Support for "Dancing Script" (Cursive) and "HarmonyOS Sans" (Modern).

⚙️ Main Parameters

 `Name_Text` (The name or word to display at the top) 

 `Font_Choice`  (Text font style)

 `Name_Thickness` (Text Thickness (Relief))

 `Plate_Length` (Total width of the key bar )

 `Pin_Count` (Number of key hooks)

 `Fixation_Method` (Choose between Screws or Double Sided Tape | With Screws)

 `Pin_Vertical_Offset` (Fine adjustment of pin height)

🖨️ Printing Tips

1. Orientation: Print lying flat (with text facing up).

2.  Supports: No supports needed for most printers (angles are designed for 3D printing).

🛠️ Usage Instructions

1.  Open the `.scad` file in OpenSCAD.

2.  Use the "Customizer" panel (Window > Customizer) to adjust values.

3.  Change `Name_Text` to your desired name.

4.  Adjust `Pin_Count` as needed.

---

Created with OpenSCAD - Parametric Design