The perfect bed scraper

As a lifelong woodworker with years of sharpening exsperience I have been messing with something very similar to this. I found I needed a 16 degree angle wedge to match my blades, that are actually not original Bambu. Anyway, I also printed in a m3 nut, which means printing the wedge at an angle, and is a bit of a pain, but it gives a good grip. The big advantage I found is that with the wedge at the right angle, the blade can be easily honed to a razor-sharp edge. This does make the edge easy to damage, so I added a "Back angle" to make the point more robust. I do this by simply turning it over and using the natural angle this produces. So far I am extremely happy with the result. Far superior to the original Bambu design. If you have a fine stone, give it a try. I used a fine diamond stone and a leather strop to remove the wire edge. Pic one main angle, pic 2 back angle. I am printing this version as I post, it's a much faster print, and the hollow handle probably means more solid

I’ve chosen this scrapper between dozens of others and still like it pretty much after printing it. fyi: failed to print it twice on my p2s until added a brim

printed out without a problem. solid design

this is a very solid build that's a perfected version of bambu's official design

I've been using the original bambu scraper and it's been fine. Turns out you don't know what you're missing until you try this one. The designer isn't lying when they say it's the perfect angle. Brims from supports just pop right off with zero effort. 10/10 scraper.

very good design. thank you!

super easy to print out and the no ams version looks great

very good print.

I like this handle/grip for the bed scraper! Useful angle to easily scrape the print bed, and the handle holds the scraper securely. It's a good size, has a good grip and is easy to hang up for storage.

This is a brilliant scraper! Perfect angle to avoid damaging the bed 👍🏻