Solid wheel for ab roller
Print Profile(1)
Description
I saw an ab roller in the fitness section, but its strength was not enough; it cracked and broke when I used it, so I made a solid, compatible-sized wheel.
This is the wheel in the image above; as I rolled it, the strength was still not enough because it was printed with PLA.
I printed a solid wheel with PLA, tested it, and felt that the strength was sufficient, and it didn't even use more material.
If conditions allow, printing with PLA-CF or PETG would be better; I think this red and black color scheme looks quite good too.
You should also be able to find the full design of the ab roller that is compatible with the original author's, with this compatible size, in that community.
My wheel matches its size.
However, since the original author does not allow derivative works, I cannot reference it, so I just made a wheel separately.
Because I don't feel it's necessary to duplicate effort. Although this is also very simple to do.
I suggest you can print the original author's ab roller rod and handles, and then print a wheel from me.
The strength of this wheel is much higher than the original, and it can be printed with very simple PLA material, without needing materials like TPU.
My solution is to directly wrap a layer of cloth around it, or a layer of adhesive strips or even tape you have on hand. Fabric medical tape can also work. Black electrical tape also works; the red and black color scheme will truly look very nice and premium.
License
Comment & Rating (0)