Notification Lamp
Print Profile(1)
Bill of Materials
- GU10 Lamp Socket x 1: 18mm mounting hole spacing
- GU10 Lamp x 1:
- High-voltage Connection Cable x 1: 2-wire
Description
I made this lamp for my own use to have kind of a notification light on my desk for some occasions. I also had some Hue GU10 lamps lying around so I created a lamp around it and this is what was coming out. Since I'm quite happy with the result, I'm sharing the model here – maybe someone else does like it and can use it.
I've used Basic Filament (Black Sparkle) and PETG Translucent.
The black and transparent rings are printed separately. They are designed so that they can be stacked precisely on top of each other. A little superglue between the rings ensures sufficient hold.
The base has two 3.5 mm holes spaced 18 mm apart for screwing in a GU10 socket. There is enough space in the base to connect a connection cable to the GU10 socket. A cable gland is also included, which fits a standard 2-pin connection cable.
License
Comment & Rating (0)