Rattle
Print Profile(2)
Description
I made this rattle because i needed a simple and funny toy to print for a toddler.
The printing process is very simple and you use only 30 grams of filament!! if you are going to print the AMS model first make sure to rotate the face of the model to the plate to have a smooth reverse print. with every version i reccomend to print with 25% honeycomb infill to make sure that is not breaking apart on the first fall. for filling this model i used some airsoft “beads” but you can download and print the one published with this model (print at least 6 of them).
last but not least make sure you make the pause the layer before the closure of the square and add the rattle fillers, then resume the print and the job is done!
!!ATTENTION!! MAKE SURE TO CLEAN THE MODEL BEFORE GIVING IT AWAY ,I DO NOT ASSUME ANY RESPONSIBILITY FOR ANY MISUSE OR UNSAFE HANDLING OF THE PRINTED OBJECT!! MAKE SURE TO WATCH YOUR CHILDREN!
Boost Me (for free)
BOOST IF YOU LIKED THIS MODEL!
Boost Me (for free)
Documentation (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)