Surface Finish Speed Test - Free 3D Print Model

Search models, users, collections, and posts

ordnerino

3D Printer>Test Models

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.9(145)

Open in Bambu Studio

Boost

720

2471

157

2.9 k

1.6 k

Released

Description

When evaluating the surface finish of untested filaments, this test id for you. Especially when printing with matte materials, the flow (or in this case the speed) is defining the finish and how glossy/matte the surface will be.

This test has eight sections to test the finish:

45 degreee overhangs
indent text, digits and shapes
curved zig-zag
90 degree sharp turns
medium and big curves
90 degree big turn
wide zig-zag
vertical indents to evaluate face to face

The model is 30mm in height, with 3mm sections, so 10 different speeds can be tested (e.g. 20 to 200 mm/s).

The Thickness is chosen to be two extrusion widths (0,42-0,45mm).

The test takes roughly an hour (greatly depending on your settings).

Comment & Rating (157)

@iLoveGears

Print Profile

0.16mm layer, 2 walls, 15% infill

Great print to get an understanding of the different speed levels. However the layers ended up looking all the same 🤔 (A1 printer)

@DefnotDesigns

on my p16 I can't tell a difference either.

@4tra

Boosted

moded a little bit. and made it from 40 to 100 and then each increase +100. so the last one is 500. anyone can tell me what should i do to make it more even at higher speeds ?