CoD Mobile Ghost

Print with 100% infill with a 0.08mm layer height and a 0.16mm base layer.

The model measures 96.19 x 171 mm.

You can print with higher layer heights, below the 0.48mm base thickness.

The maximum allowed thickness is 2.24 mm and the actual thickness is 2.24 mm.

Filaments used:

#080a0d PolyLite Black PLA. Transmission Distance: 0.3

#c00d1e Bambu Lab Basic Red PLA. Transmission Distance: 4

#ff9016 Bambu Lab Basic Pumpkin Orange PLA. Transmission Distance: 5.5

#e2dedb PolyLite White PLA. Transmission Distance: 5

Swap Instructions:

Start with black.

At layer 8 (0.72 mm), change to red.

At layer 11 (0.96 mm), change to pumpkin orange.

At layer 16 (1.36 mm) change to white for the rest.