Tiger 4

Project: Tiger 4.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 112.62x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm

Filaments Used:
    PLA Bambu Basic Black  Transmission Distance: 0.1
    PLA BambuLab Basic Blue Gray  Transmission Distance: 2.6
    PLA Bambu Matte Terracotta  Transmission Distance: 1.6
    PLA Bambu Matte Caramel  Transmission Distance: 0.7
    PLA Bambu Basic Jade White  Transmission Distance: 6.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (0.68mm) swap to Blue Gray
    At layer #19 (0.88mm) swap to Terracotta
    At layer #23 (1.04mm) swap to Caramel
    At layer #25 (1.12mm) swap to Jade White for the rest.