Iron man
Print Profile(1)
Description
Project: iron man 4.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 122.33x240mm in size
You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#8e9089 PLA BambuLab Basic Gray Transmission Distance: 2
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to Black
At layer #14 (1.2mm) swap to Gray
At layer #16 (1.36mm) swap to Beige
At layer #18 (1.52mm) swap to Jade White
At layer #20 (1.68mm) swap to Orange
At layer #21 (1.76mm) swap to Red for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)