The Flash
Print Profile(1)
Description
Speed meets texture—3D printing makes The Flash hit hard both in motion and in style! ⚡🔥
If you are interested in my work and want to learn more about me and my creations, follow me here: https://linktr.ee/Terry.creation.
I’d greatly appreciate your support on Buy Me a Coffee: https://ko-fi.com/terrycreation.
For commercial licenses, visit: https://patreon.com/TerryCreation.
Boost Me (for free)
Printing Instructions
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 132x220mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 6 unique filaments
Swap Instructions:
Start with Jade White
At layer #16 (0.8mm) swap to Ash Gray
At layer #21 (1mm) swap to Blue Gray
At layer #28 (1.28mm) swap to Charcoal
At layer #32 (1.44mm) swap to Red
At layer #42 (1.84mm) swap to Jade White
At layer #45 (1.96mm) swap to Yellow
At layer #50 (2.16mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)