shroom?
Print Profile(0)
Description
roject: AI shroom.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.1mm and the Actual Depth is 2.6mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Sunlu Meta White Transmission Distance: 8
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA Overture Matte Light Blue Transmission Distance: 1.8
PLA Sunlu Meta red Transmission Distance: 7
PLA Sunlu Green Transmission Distance: 6
PLA BambuLab Basic Orange Transmission Distance: 7
PLA Sunlu Matte Blue Transmission Distance: 3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA PolyLite Pro Purple Transmission Distance: 1
This print uses 10 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White
At layer #12 (1.04mm) swap to Grey
At layer #16 (1.36mm) swap to Light Blue
At layer #21 (1.76mm) swap to red
At layer #25 (2.08mm) swap to Green
At layer #26 (2.16mm) swap to Orange
At layer #28 (2.32mm) swap to Blue
At layer #29 (2.4mm) swap to Yellow
At layer #32 (2.64mm) swap to Purple for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)