sparkingjin

Glue

cover

6039843205505205484.jpg

6039843205505205482.jpg

6039843205505205487.jpg

6039843205505205490.jpg

plate_1.png

plate_2.png

plate_3.png

2025-04-12_401d30ca850c3.jpg

0.2mm layer, 2 walls, 15% infill

Printcent van Gogh

Benchy_portal_no_fill (4).jpeg

Benchy_portal_no_fill (2).jpeg

Benchy_portal_no_fill (3).jpeg

Benchy_portal_no_fill (1).jpeg

I did not like that the portals were solid, so I changed them to be see-through.I also reduced the portals&#39; height, because I like them better this way.You need a 6x3mm round magnet for each Benchy-half.&nbsp;It&#39;s printing with a lot of supports that you have to remove very carefully because the portal is pretty delicate. It was easily possible with fine pliers/tweezers for me.&nbsp;There are two of each on the print plate, so you can keep one and gift one to a friend :)Hope you like it!

Slim See-Through Portals. No White Filling.

I created a nice model of the boat, I cut the boat in 2 and from an svg I created the portal.You can put it where you want and go out in other places!There is the fridge version, with 6mm magnets, or stand alone.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Bench boost</boostcontent></boostme>

Portal Benchy

ASIA

Print Profile(2)

Bill of Materials

Description

Comment & Rating (37)

License

Related Models