Moana Oar - Free 3D Print Model

Search models, users, collections, and posts

phoenix3dmodels

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.4 h

1 plate

5.0(22)

0.2mm layer, 2 walls, 15% infill rectilinear, 7mm brim

4.8 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

232

378

177

Released

Description

Boost Me (for free)

Like this model, please consider giving it a boost to help me to continue to make free files. Please also do comment with any other versions you'd love to see!!

Have any Requests? Please leave a comment and let me know what you'd like to see!!

Boost Me (for free)

Like this model, please consider giving it a boost to help me to continue to make free files

Moana Oar

This is the smaller version that comes in 4 pieces with a hole down the center for a 9mm dowel. The dowel will need to be 600mm long

I will be uploading the full version (around 2 meters long) in the next day or so

Check out my other Cosplay files in my Cosplay / Props Collection and follow me for more designs to come

Personal Use Only

If you would like a Commercial License to sell printed versions please sign up to my Patreon or Thangs memberships

https://linktr.ee/Phoenix3DModels

Follow me for more designs!

Personal Use Only

If you would like a Commercial License to sell printed versions please sign up to my

MakerWorld or Patreon Membership

https://linktr.ee/Phoenix3DModels

Membership

Want to sell prints of my files? Then please join my Membership for a Commercial License

Join

Comment & Rating (34)

@carzet

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I liked it a lot, easy to print, no complications, very beautiful

The profile uploader has replied

Show original

@phoenix3dmodels

love the weathering on this!

@MakerMikey

Print Profile

0.2mm layer, 2 walls, 15% infill

I am happy overall, but I recommend using the profile my buddy added with the brims and better infill for all pieces, using plate glue and increasing the plate temp by 5°C as some of my print lifted a bit which caused a gap after assembly. also if you are using a printer with a build plate that moves like my A1, I highly recommend printing one piece at a time and slow the print speed to 50% after about half of the print is done to help prevent the print from being knocked off the plate!

@3DPrintLearnCha

Boosted

Great model. My daughter loves this addition to have for her Halloween costume and to play around the house. I wanted to put it together right away so I create a dowel to put the pieces together. https://makerworld.com/en/models/1865082-9-3mm-od-dowel-40mm-length#profileId-1995411

@JuanNN.

Print Profile

0.2mm layer, 2 walls, 15% infill

Top 10

Show original

@isanvicente

Turned out great (FlashForge AD5X) ! I designed a connector piece to join the various parts. The two parts of the oar use a different hinge rod with no middle ring. Photos show a full oar containig 3 shaft parts (2 + end piece). For that you need to print the middle shaft twice, 3x middle connectors and 1x connector for the oar blade. I printed the connectors horizontally for robustness. I Had to change the orientation of the parts to fit it on the printers bed (22cm x 22cm x 22cm). Also, oar's blade parts were printed with supports to avoid adhesion problems. Would you mind if I post a remix on thingiverse? Thanks!

@3DPrintLearnCha

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

worked great for add on to Halloween costume for my daughter

@lipecpereira

Print Profile

0.2mm layer, 2 walls, 15% infill

muito bom

@lipecpereira

Absolutely beautiful My niece will adore it

Show original

@DreadPirateKyle

Question. The 50% description on the STL download files. Is that meant to imply the files are half as big as the intended print? Should I double the size to print the actual oar? New to the game, sorry if its a silly questin.

The designer has replied

@phoenix3dmodels

hey, sorry for the confusion, this is the smaller version of the oar at half the size, so it just means that the files are scaled to 50% of the full scale printed, they'll be around 1m long the 100% scale version is 2m long and around 8 pieces (which I've just realised I've not actually uploaded yet, so will get that sorted this evening)

(Edited)

@The_Angry_Panda

Replying to @phoenix3dmodels :

Hey! Have you uploaded the full version? I have been looking for it and cannot find it for the life of me.

@DVO2019

Hello! How are you? What should I put inside the hollow part? Or can I leave it as is

The designer has replied

Show original

@phoenix3dmodels

you can leave it as it is, but if suggest putting a long wooden dowel inside to give it some more strength and less prone to breaking apart

@3DPrintLearnCha

Boosted

I had the same question and couldn't find anything so I just modeled this dowel to assemble it. https://makerworld.com/en/models/1865082-9-3mm-od-dowel-40mm-length#profileId-1995411

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Moana/Vaiana Heart of Te Fiti Pendant

Fabs8819

4.4 k

1.2 k

291

Moana Hei Hei with movable head and tail

Ofly

1.5 k

661