Toolbox Cigarette case
Print Profile(2)
Bill of Materials
Description
Milwaukee Cigarette Toolbox
A Milwaukee-inspired cigarette box with space for 20 cigarettes and a lighter.
Visual design inspired by the original concept from Eureka 3D Printing. This is a redesign with different dimensions and internal structure.
This model should be printed in separate parts, then glued and assembled using screws.
I used 4 self-tapping screws (BT 2x6) from Bambu Lab's website. The length of the screws should not exceed 6mm.
i recommend using 6 magnets for the lid and body, but 4 should work as well, but it wont be as strong.
You will need magnets with a diameter of 3mm and a depth of 1mm.
when gluing the magnets, remember to make sure you place them the right way up, so the two sides attract each other.
UPDATE:
I Just added a version for 100's if thats your thing, same design just a bit longer :)
most pieces are compatible except for the cornerpieces
Boost Me (for free)
If you like this model, please consider to giving it a boost! i would really appreciate it :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (56)