These are the 12.5 mm Bolt-Lock - ScrewOn Mounts for Multiboard. They have been adapted to work with Hillman Borefast drywall anchor screws. See pic of the anchor screw packaging. STEP file provided if you need to make changes.

RC charger stand for Junsi iCharger DX6, Gens Ace iMars D300 and a generic stand. Allows the charger to sit at an angle so the screen and buttons are easier to see. Stand folds flat when not in use for easier storage. Optionally integrates with the PSU box I designed: https://makerworld.com/en/models/1512827-hota-d6-pro-lipo-charger-power-supply-case#profileId-1584324

Case for PSU from HOTA D6 Pro Lipo charger.

Here's are a couple Team Team Associated RC key chains/zipper pulls. The “AE” one is more suited for a key chain. The “Team Associated” one is more suited for a zipper pull, as it is pretty long. It had to be to make the “TEAM” letters come out well. If you have a 0.2mm nozzle, you could scale it down on the X and Y axes to make it smaller. See my profile for other RC logo key chains.

Here's a Tekno RC key chain/zipper pull. See my profile for other RC logo key chains.

Here's a Team Losi TLR RC key chain/zipper pull. See my profile for other RC logo key chains.

This is a top bracket to add an additional shelf to Edsal/Muscle Rack shelving.

This is a wall mount for the common 4L Cereal/Rice air-tight containers one can get on Amazon, Temu, Aliexpress, etc. I took Paradox69's Multiboard mount and replaced the Multiboard holes with dry wall/wood screw holes. Mount can be installed on a wall stud via the vertical holes or can be installed on a board using the horizontal holes. I suggest printing in PETG, 30% gyroid infill and 3 walls with a 0.4mm nozzle.

This is a remix of a remix of the Marsgizmo Filament Bunker V3. Main change is the desiccant basket is removable. Allows you to dry out the desiccant without emptying it from the basket. Also, I added slots around all sides and bottom for the best air flow. I suggest printing the basket in ABS or better so you can dry the desiccant at 65c without worrying about the basket melting. PETG would also work if you lower the drying temp a bit.

RC droop blocks to set the droop on 1/8th scale off road buggies and truggies. Don't spend $30 or $40 on RC branded droop gauges when these 3d printed blocks work just as good.

I was looking for a hard drive stand to store more than 6 hard drives. So I remixed the original and made it modular.

Combo RC shock stand and diff drain for 1/8th and 1/10th scale shocks and diffs. These have been a big hit at my local RC track. Any feedback is welcome.

I wanted something to holder the hinge pins and pills of my 1/8th scales instead of just throwing them in a zip-lock bag. Any feedback is welcome.